Getting Started with Yale Smart Opener

GARAGE DOOR Opener kit

1 x Yale Smart Opener

1 x Yale Door Position Sensor with CR2477 Battery 

2 x Wiring looms

2 x Double sided tape

GATE Opener kit

1 x Yale Smart Opener

1 x Yale Door Position Sensor with CR2477 Battery 

1 x Magnet for Door Position Sensor 

2 x Wiring looms

2 x Double sided tape 

Yale Door Position Sensor - Garage Door Accessory

For Garage application, sold separately

1 x Door Position Sensor with CR2477 Battery

Yale Door Position Sensor with Magnet - Gate Accessory

For Gate application, sold separately

1 x Door Position Sensor with CR2477 Battery

1 x Magnet

1 x Double sided adhesive

Yale Smart Keypad - Sold Seperatly 

Here you will be able to check the compatibility of your Garage Door or Gate motor and view the wiring guide. 

Click here to open the compatibility checker in a new window

If you are unable to find the model of your Garage Door or Gate motor, please reach out to our support team by clicking contact support. 

Click Here to view the installation videos

If the Yale Smart Opener needs to be installed outdoors for example on a gate, in these applications please ensure to place the componantents inside of a weatherproof box.

The Door Position Sensor (DPS) is set up in the Yale Home application. Go to SET UP Device and scan the QR code, follow the steps to add the device. To activate the DPS, remove the cover on the rear of the unit and insert the battery. The LED on the front of the unit will flash 10 times, close the cover and install the unit on your door or gate.

Click here to see our How To Videos

IMPORTANT - Ensure the magnet is always to the right of the Yale logo and within 20mm of the Door Position Sensor, installed on the inside of the Garage. 

Position Example

Side Sectional Door

Roller Door

Tilt Door

Sectional Door

Swing Door

IMPORTANT - Ensure the magnet is always to the right of the Yale logo and within 20mm of the door position sensor. 

Position Example

Folding Gates

Swing Gates

Sliding Gates

The Black cable should be connected to the ' - ' connection point. 

The Red cable should be connected to the ' + ' connection point.

The Yale Smart Opener is designed to receive power directly from a Garage Door Opener or Gate Automation device.

But on occasions with certain Brands, the Yale Smart Opener will require that you use an adaptor to be able to use it.

We recommend the  Normstahl Adapter box. This box can be used on the following brands and models below:

• Henderson Magic 600 & 1000
• Normstahl Magic 600 & 1000
• Entrematic Magic 600 & 1000
• Crawfords Magic 600 & 1000
• Yale Magic Magic 600 & 1000

Always maintain a line of sight to the gate or garage door to make sure no one should cross the path or stand in the path of the moving gate or garage door when using the Yale Smart Opener device.