Installing the Yale Access Module - Conexis
This article will help guide you through the steps to install the Yale Access Module into your Yale Conexis Lock.
NOTE: If you have already downloaded the Yale Access Application please select 'SET UP NEW DEVICE' and scan the QR code on the Yale Access Module and the below installation flow will detailed. See section below 'Installing Yale Access Application'
Download the Yale Access App
Before you get started, download the Yale Access App from either the Apple Store or Google Play depending on whether you use an iOS or Android phone:
Step-by-step installation guide
Step 1. Remove battery cover
Using a Phillips-head screwdriver, loosen the battery cover screw. Slide the cover away from the lock.
Step 2. Remove a battery
Remove the batteries from your lock to power it off. Wait approximately 10 seconds for the lock to fully power down.
Step 3. Remove the Module Cover
Slide the module cover up to remove this and access the slot
Step 4. Install the Module
Insert the Yale Access module into the slot in the module compartment. Make sure it is properly seated in the lock.
Step 5. Replacing the battery cover
Restore power to the lock by reinserting the batteries. The light on the front of the lock will flash blue and play a fanfare noise, once this has happened please proceed.
Step 6. Registering the Module & replacing the cover
Follow the below steps to register the Yale Access module with your lock.
Installing Yale Access Application
Yale Access devices come with a QR code that can be used to set up the device in the Yale Access App. This code is included on the Yale Access Module and is helpful during setup. If you no longer have a QR code associated with the device, the serial number can be used during setup.
- Open the Yale Access App
- Select the menu in the top-left corner
- Select Set up a Device to access the QR code scanner
- Scan the code. If you are unable to scan it, select Can’t Scan the Code to set up with the Serial Number, which is the 10-digit number located on the sticker inside the battery cover.
- Follow in-app instructions to complete setup steps
Next step: Set up the Yale Connect Wi-Fi Bridge
Yale Connect Wi-Fi Bridge serves as a Wi-Fi bridge between our Servers and your Smart Lock so you can lock and unlock your Smart Lock remotely, right from your phone. With Yale Connect Wi-Fi Bridge, you can instantly let visitors into your home when you're not there.
Click on the link below for step-by-step instructions to set up the Yale Connect Wi-Fi bridge with your lock.