How do I connect my CCTV system to my TV?
Via either the HDMI/VGA Ports on the back of the DVR.
Via either the HDMI/VGA Ports on the back of the DVR.
Yes, you can get email alerts.
Yes, Go to “Network” menu option in the main menu setting then select the P2P menu option. The QR Code will be displayed, scan SN Device QR code with your View App.
Go to the main menu, left click on ‘System’, then click on the date and time tab.
Yes, go into the main menu, select camera, connect your camera ethernet cable to the router then click on IP search, then follow the on-screen instructions.
For instructions on how to customize a CCTV set-up, please view the manual. To download the full CCTV manual please click the link below.
From the main menu, select ‘storage’, then select ‘schedule’, then the record tab. ‘Regular’ is for continuous recording, ‘MD’ is for motion detection to record for only certain times of the day.
Our App is constantly improving, and we welcome feedback from users so we can constantly improve features and fix any bugs quickly.
Go into the storage menu and select ‘HDD manage’ and check the capacity of the hard disk. Also, check that your record settings are correct in the schedule menu.
Please check your router is connected to the internet. Using a laptop or tablet connected to your wifi and then try to connect to a web page to make sure your internet connection is working properly. Please check also that your DVR is online, go to “Network” in the main menu setting and then select P2P menu option in the right-hand side menu and make sure the status in online and the “enable” box is ticked.
Lighting around the camera at night can cause this, such as security lights or street lamps. Try re-angling and/or relocating your camera. Then re-test.
Yale WIFI cameras do not require a wire to connect it to the DVR, these cameras do however need to be plugged into a power source (these are not battery powered). Only for the first setup, you need to connect the cameras to the router using the ethernet cable. Once the setup is completed you can use the cameras with the wifi connection.
No, you have to connect this directly to the router using an Ethernet cable. However, you can use wifi extenders with an embedded Ethernet port to get an access point closer to your DVR.
This depends on what CCTV system you have.