How do I install my Fire Safe?
The safe can be fixed to the floor using the supplied bolts. It is recommended to fix inside brick or concrete for a firmer fixation. Refer to the installation manual.
Support for Yale Fire Safes
Getting Started
Can I wall or floor-mount this safe?
This safe can only be floor-mounted due to the fire-protective material inside.
How do I set the PIN code on my Fire Safe?
Press the programming button inside the safe, near the battery compartment. Type in your new code which can be between 4-12 digits. Then, press the programming button to complete.
Support for Getting Started
FAQ
I can’t access my safe as the batteries have gone flat
The Fire Safe has a manual override method, in order to gain access in cases such as this you first need to apply a +9V battery to the two terminals located underneath the dial. Click the link below to read how to do this.
The keypad flashes 3, 2, 1. What does this mean?
You have been locked out due to entering an incorrect PIN code. Please wait until the three-minute countdown has expired and then re-enter the correct PIN code. If the batteries are flat, then you would need to hold the +9V battery on to the terminals whilst the display counts down from 3,2,1.
How do I set the PIN code on my Fire Safe?
Press the programming button inside the safe, near the battery compartment. Type in your new code which can be between 4-12 digits. Then, press the programming button to complete.
Is it possible to secure the safe to the wall?
This safe can only be floor-mounted due to the fire-protective material inside.
See all FAQ